PRODUCT CODE

PRODUCT NAME

1504900700

Threaded  guide wire, Ø3.2*300, 3pcs

1504902700

Depth gauge, for locking bolt

1504515700

Reamer  shaft, Ø7.5, 2pcs

1504912600

Drill bit & slide limited device, Ø3.2*250,  2pcs

1504902600

Drill bit  & slide limited device, Ø4.0, 3pcs

1504901700

Drill bit for positioning rod, Ø5.2

1504900600

Drill bit  for positioning rod, Ø12 / Ø3.2

1504902900

Screwdriver,  quick coupling, for locking bolt, SW3.5

1504903300

Screwdriver, hex, for the end  cap, SW3.5

1504901400

Guiding  bar, for sliding hammer

1504902400

Soft tissue separator, Ø3.2

1504901300

Small  wrench, Ø4

1504901500

Guiding bar

1504900900

Connecting  screw, 2pcs

1504903100

Compression screw, Ø4/M6/SW6.5

1504912400

Drill  guide, Ø3.2

1504902200

Soft tissue separator, Ø8

1504902300

Outer  sleeve, for positioning rod

1504932300

Cancellous locking bolt  guide, Ø8.5

1504922300

Cortex  locking bolt guide, Ø8.0

1504506100

Reamer, Ø7.5

1504516100

Reamer, Ø8.0

1504505800

Reamer, Ø8.5

1504515800

Reamer, Ø9.0

1504525800

Reamer, Ø9.5

1504535800

Reamer, Ø10.0

1504545800

Reamer, Ø10.5

1504555800

Reamer, Ø11.0

1504565800

Reamer, Ø11.5

1504575800

Reamer, Ø12.0

1504904700

Cannulated awl, Ø12/ Ø4

1504903400

Connecting  bar, for extracting main nail, M8*1

1504502700

Wrench, SW11

1504900200

Ruler,  for developed image

1504911600

Locking screw, for distal  outrigger, M11*1.5, 2pcs

1504921600

Locking  screw, for proximal outrigger, M6, 2pcs

1504901600

Locking screw, for connecting  bar, M8*1, 3pcs

1504902000

Position  limited block

1504900100

Skin protector

1504901800

T-drill  bit, Ø5.2

1504902500

Drill guide, Ø4.0

1504505300

Locking  screw wrench, hex, SW5

1504505400

Slide tissue device wrench,  SW3.0

1504912300

Position  rod guide, Ø5.2

1504505200

Ball tip wire guide

1504902800

T-wrench,  SW3.5

1504901000

Connecting screw wrench,  SW6.5

1504903200

Poly-axial  wrench, SW6.5

1504901900

T-handle stabilizing rod

1504900400

Proximal  rigid reamer guide, Ø12

1504901100

Sliding hammer, M8*1

1504501100

Sliding  hammer

1504900800

Handle

1504913000

Proximal  outrigger 45°

1504902100

Position distal outrigger

1504903000

Proximal  outrigger

1504901200

T-shaped quick coupling  handle

1504900300

Guide  wire holding clamp

1504900500

Cannulated awl ( Ø12/ Ø3.2)

1504505100

Ball  tip guide wire ( Ø2.5/ Ø4)